Green Collar Innovations Inc.
212-2386 Haines Road
Mississauga ON, L4Y 1Y6
 905-803-9600
 905-803-9700
 Send us an E-mail

NS600 Sigma II

The NS600 is a configurable indexer that attaches to the side of any Sigma II amplifier from 30 watts to 55 kW and accepts ASCII serial commands over RS232/422/485. The NS600 can store up to 128 positions and position relative to a registration input. The stored positions can be initiated by digital inputs and the NS600 can add time delays, drive digital outputs, and repeat or link moves. In addition, the NS600 has a rotary mode well-suited for dial tables and works seamlessly with absolute encoders. Target position or any of the configurable parameters in the NS600 or the Sigma II can be sent by serial commands. The open architecture and modular hardware provide the most flexible solution for indexing applications.

Simplified Control System
  • Point-to-point motion with high speed registration capability
  • No-programming, index table configuration
  • Motion commanded by discrete I/O or ASCII serial commands over RS232/422/485
    Easy to Setup and Use
  • Just snap the JUSP-NS600 application module to the side of any Sigma II SGDH amplifier
  • IndexWorks™ Software uses fill-in-the-blanks settings
  • Index table contains up to 128 moves
  • Moves can be linked for sequential operation
    Application Emphasis
  • Feed-to-length applications including:
  • Roll feeding
  • Bag making
  • Press feed
  • High speed, accurate indexing
  • Packaging and labeling
  • Linear motors, linear slides, indexing conveyors and rotary tables
  • Replacement for mechanical index tables, clutch brake systems
  • Cut-to-length
  • Pick and place systems
    Certified International Standards
  • UL, cUL listed (File# E147823), and CE compliance

    		•  

    Product Documents

     NS600 Catalogue
     NS600 System Selection


    Download Reader



    Custom Database and Web Design by Intellectual Minds Consulting